//****************************************************************************

Installation for Windows NT4. (ISDN TA or ISDN MODEM for Windows NT 4.0 )

   <1> Run Windows NT
   <2> plug the Intelligent ISDN TA PC Card into your latop's PCMCIA slot.
   <3> Insert the "Windows NT" driver disk into floppy driver(a:\).
   <4> Enter "Control Panel" -> "Network"
   <5> Slect the "Adapter" Tab. Click "Add"
   <6> Click "Have disk", and give the driver path (a:\), click "OK".
   <7> You will find device name (e.g "Intelligent PCMCIA ISDNTA for CAPI " )
       in the device list box. Click "OK".
   <8> When the setup window appears, make sure that the following settings
       are well configured:
       (a) "I/O base" is not used by any other device
       (b) "IRQ"is not conflicted.
       (c) "Mem" setting is for PCMCIA attribute memory use , you can select
	   one of the settings.
       (d) "Pcmcia" setting:
	   select "CARDBUS" if the ISDN TA PC Card is seating in the CardBus
		  slot and Win NT can NOT recognize the Slot.
	   select "365 COMP" for normal PCMCIA slot and Win NT can KNOW the
		  slot.
       (e) Make sure "Line setting" are correct.
   (9) Click "Continue", And click "Close"
   (10) Cool Start(re-boot) Windows NT
   (11) Check wether the Intelligent ISDN TA PC Card driver is well installed.
	(a) Enter "Program" -> "Administrative Tools(Common)" -> "Windows NT Dianostics".
	(b) Click "Service" Tab and "Device" Command button to check the "ISDNTA"
	    status.
	    If the status is "running",it means the ISDN TA PC Card is well running.
	    If the status is "stop", go step (8) and check the settings.
   (12) Install CAPI-base application program(RVS-COM)
   (13) Now you are ready to go. You can run"status.exe" at the "system32" sub-directory
	(eg c:\winnt\system32\status.exe )to trace the ISDN connect statuses when you
	are ISDN connections.

   Note:(1) To chang the I/O, IRQ, Mem, go to "My Computer" -> "Control Panel"
	    -> "Network" , then select "Adapter",Highlight the device name
	    (e.g "Intelligent PCMCIA ISDN TA" ) , click "Properties" command
	    button. Now you can change the parameters as your wish.
	(2) After the setting changes , you always suggested to coll start
	    ( re-boot ) the NT system.
	(3) For driver version4.x the NT driver only works with CAPI mode .
	    The ISDN AT command emulation is also avaiable through CAPI. The
	    other API modes, such as NDIS and VCOMM , will supported by latter
	    release .


//****************************************************************************
How to remove the NT 4.0 driver .

      Enter "Control Panel"' -> "Network" -> "Adapters"
      Highlight the device name( e.g  "Intelligent ISDN TA" or
      "Intelligent ISDN MODEM" ), click "Remove" -> "Yes" -> "Close"
      The drivers for Windows NT 4.0 will been removed .
      Restart the computer Now .


//****************************************************************************
How to use the Protocol analizer application.

      Please run the pant.exe , to enter the Protocol Analizer window .
      We provide D , B1 , and B2 channel protocol analizer function
      <1> The "File" pop pup menu :
	   User can click "Save" or "Save As" item , to save the
	   capture data to file.
      <2> The "Display" pop pup menu :
	   Click the item Playback RAM , will capture the playback
	   RAM data , interprete  and  display it .
      <3> The "Filters" pop pup menu :
	   To enable the B1 , B2 , or D channel data to copy to
	   Playback RAM .


//****************************************************************************
How to use the Status application:

       Please run the status.exe , to enter the status window .
       We provide the Line status monitor utility .
       The D  chan LED :  To indicate the D channel is ON , or OFF .
       The B1 chan LED : To indicate the B1 channel is ON , or OFF .
       The B2 chan LED : To indicate the B2 channel is ON , or OFF .
       The "Close" command box : To close the staus utility .
       The "OK" command box : To move the status window to system tray
       The "More" command box : Click "More" , will expand the window
				, can display more information .
       The expand message include :
	 B1 channel protocol , B2 channel protocol :
	 The B1 channel protocol will display the protocol ,
		       only B1 channel is connect success .
	 The B2 channel protocol will display the protocol ,
		       only B2 channel is connect success .


//****************************************************************************