D-Link DFE-570TX PCI Fast Ethernet Server Adapter Contents ======== - Introduction - Revision History - Support Options - Copyrights, Trademarks Introduction ============ The DFE-570TX Server Adapter will provides high performance solution and safe the server PCI bus slot isn't enough problem. Each can provides 10M or 100M half/full duplex connection to Switch. The ports running in 10M or 100M wouldn't share one collision domain. These 4 ports can aggregate the throughput to 800Mbps at full-duplex mode. The built-in driver-level software can provide two feature for Sever connection- Fault-Tolerance and Load-Balance. This software provides dynamic fail over and allows customers to load balance network traffic across multiple network ports in this card. It ensures that users maintain non-stop access to key resources on the network, even if one or more of the network interface connections goes down. If a connection to an port is lost, This software will instantly take the fault-port out of the array and balance the traffic across the remaining ports with no loss of data and, just as importantly, without loss of connection. Also, when an adapter with an NDIS 4.0 driver is brought back online, built-in software will instantaneously add the adapter into the array and redistribute the traffic. You can get latest releases of drivers from D-Link's Web site (http://www.dlink.com). We hope our new readmes and installations will minimize the users effort to make our products work. Should there be further recommendations please contact the support manager at the local D-Link Office listed bellow. Revision History ================ * Diskette Revision 990601 - Upgrade oemsetup.inf (v1.1b) for NT4.0 SP5. * Diskette Revision 990201 - Upgrade Fault-Tolerance and Load-Balance Software (V1.1a). - Upgrade MIB files . * Check http://www.dlink.com for any driver not in this diskette ,or any newest releases of drivers. * Diskette Revision 981201 - Support Windows NT 4.0 Server Driver (V4.31.00). - Support Fault-Tolerance and Load-Balance Software (V1.1a). Support Options =============== For technical support, you may contact your authorized D-Link distributor, dealer or the following D-Link branch offices. In U.S.A. Tel: +1(949)788-0805 Fax: +1(949)753-7033 BBS: +1(949)455-1779 BBS: +1(949)455-9616 In Canada Tel: +1(905)829-5033 Fax: +1(905)829-5223 BBS: +1(965)279-8732 In U.K. & Europe Tel: +44(181)235-5555 Fax: +44(181)235-5500 BBS: +44(181)235-5511 In Germany Tel: +49(6192)97110 Fax: +49(6192)971111 In Asia, Taiwan Tel: +886(2)2-916-1600 Fax: +886(2)2-914-6299 BBS: +886(2)2-910-1835 In France Tel: +33(1)3023-8688 Fax: +33(1)3023-8689 In Australia Tel: +61(2)9417-7100 Fax: +61(2)9417-1077 BBS: +61(2)9417-3711 In Sweden Tel: +46(08)700-6211 Fax: +46(08)219-640 In Denmark Tel: +45(43)969-040 Fax: +45(43)424-347 In Singapore Tel: +65-774-6233 Fax: +65-774-6322 In China Tel: +86(10)6846-7106-9 Fax: +86(10)6846-7110 In Japan Tel: +81(3)5434-9678 Fax: +81(3)5434-9868 In India Tel: +91(22)652-6578 Fax: +91(22)652-8476 In Itlay Tel: +39-2-2900-0676 Fax: +39-2-2900-1723 The BBS communication setup information is as follows : Speed : 2400-14400 baud - Germany 2400-9600 baud - Asia,Taiwan 14400-16800 baud - Canada 9600-14400 baud V32, V32bis, V42, V42bis - U.S.A. 2400-19200 baud V24, V32, V32bis, V42bis - U.K. & Europe Parity : none Data bits : 8 Stop bit : 1 Copyrights, Trademarks ====================== All documents and software provided herewith are Copyright (c) 1998 D-Link Corporation. All rights reserved. Windows NT 4.0 is trade name of Microsoft Corporation. Other trademarks or trade names used herein are properties of the respective owners.