D-Link Support Publishing       \NETWARE\NW311.TXT              June 1996

        D-Link DE-220 Family ISA Ethernet Adapter Installation
                   for the NetWare Server 3.11 Driver

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Please consult \SETUP\README.TXT for help with setup of the DE-220 Family.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     An ISA compatible computer
     An ODI compatible network operating system
     A DE-220 Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable will this
      skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any DE-220 Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Copy the DE22X.LAN file from the <PATH>\DE22X.lan directory
      into the subdirectory of your server. Type:

        >copy <PATH>\DE22X.lan  \NW311

        ; if NW311 is the server subdirectory
        ; <PATH> is the path where DE22X.lan resides. If the autoinstall
          was used <PATH>=\SRV311.

     Copy all provided NLM files into your server directory. Type:

        >copy <PATH>\*.NLM  \NW311

     Run SERVER.EXE on the server.
     Edit the AUTOEXEC.NCF file as follows:

        :load install
         Select <System Option>
         Select <Edit Autoexec.NCF file>

     Modify the server's AUTOEXEC.NCF as follows:

        load C:\NW311\LSLENH.NLM
        load C:\NW311\PATCHMAN.NLM
        load C:\NW311\MSM31X.NLM
        load C:\NW311\ETHERTSM.NLM
        load C:\NW311\DE22X.LAN
        bind ipx to DE22X net=xxxx  ;xxxx is the network # ie. 33

     Press Esc after editing.
     Select "Yes" to save.
     Select "Exit" to exit installation.
     Shut down the server and then turn it ON again.
     The driver is now installed and running.