**************************************************************************
*	     The procedure of reprogramming the MODEM card.		 *
*	     Flash version : 4.3					 *
*	     Version : A				     date:871013 *
**************************************************************************
     This document would be used as a description of the process of
     reprogramming(upgrading) the DME560T PC Card by using other
     programs compressed in this package.


Procedure:
     1. Extract the 560T_200.EXE to a directory in your HD.
	There should be six files as below:

	  flash.exe
	  flashldr.hex
	  lco5v200.hex
	  readme.txt
	  vpp.exe
	  lmdiag.exe

     2. Click vpp.exe at first.

     3. Double click the icon of flash.exe.

     4. There is a window showing message as " Choose File to Download "
	,then you can choose lco5v200.hex as your target file.

     5. Now it may have two types of message,depending on the previous
	firmware inside your PC card.We would suggest you to follow
	no.1 or no.2 procedure according to which message you see.

	>no.1 MESSAGE : FOUND ROM Resident Flash Loader
			Do you wish to use it ?  --> click " NO ".

			ARE YOU SURE ?
			This will Erase the Entire Flash --> click " YES ".

	>no.2 MESSAGE : lco5v200.hex may NOT be compatible with ...
			Do You wish to use it ? --> click "YES".

                        FOUND ROM Resident Flash Loader
                        Do you want to use it ?  --> click " NO ".
 
                        ARE YOU SURE ?
                        This will Erase the Entire Flash --> click " YES ".
                        
     6. If all of above are confirmed,there would be a " running " bar
	showwing the programming procedure in the " Flash Loader Ver:4.3 "
	window.

     7. Finally,a small message box," All Done ",displays " Flash
	Programming Completed ".

     8. Plug out the card from your computer or repower-on your computer..
       
     9. If your OS is Win95/OSR2,you should repower-on your computer.

    10. Plug your PC Card into the PCMCIA slot and install it.

    11. Execute HyperTerminal of WIN95 and key-in AT-COMMAND "AT&F&WZ"
	into the PC card.If the response is "OK",you have finished
	the process then.

    12. Replace LMDIAG.EXE with old file which is located at the directory of
        DME-560T LAN/FAX Modem Driver Program diskette(\diagnost\LMDIAG.EXE). .

Notes:
      1. The flash.exe is only for Win95 and Win95/OSR2,and not guranteed
	 for simulatenously use as using other programs in the OS.

      2. You could use the diagnostic function in the MODEM icon of the
	 CONTROL PANEL to check the result code of  " ATI3 ".



Fast version reference
-----------------------------------------------------------------------------
HEX FILE	  	       ATI3				 REMARK
-----------------------------------------------------------------------------
lco5v200.hex	      V.90 K56FLEX LAN-Modem Venus V2.00 (V1.21)
-----------------------------------------------------------------------------