DME560T Ethernet/Fax/Modem May 1996 Manual Update Supplement !!!!!!Note!!!!!!! For a quick start simply run INSTALL.EXE on the root of this Driver disk. !!!!!!!!!!!!!!!!! This document contains information that supplements the "User's Manual" and accompanying software. The User's Manual can be found in the root of the driver disk as MANUAL.TXT. Contents 컴컴컴컴 Introduction PCMCIA Driver Installation Getting Started EMM386 Usage with DME560T Driver Directory Structure Support Options Copyrights, Trademarks, and Disclaimers Introduction 컴컴컴컴컴컴 Thank you for purchasing the DME560T Ethernet/Fax/Modem PC Card. This diskette has network driver support for the DME560T Ethernet/Fax/Modem PC Card. There is a format change for this driver disk. All README's have been reformatted, an easy setup program, and consistency on all documentation provided. We hope our new readme's and installation will minimize the users effort to make our products work. Should you have further recommendations please contact the support manager. Install PC Card Software Manually 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 The installation software has been carefully designed to detect a combination of hardware and software installed on the PC. Proper detection will allow the PC's PC Card drivers to enable the DME560T. If the installation software fails to complete, the enabler will need to be manually copied from the driver disk to the PC. The follow the next few steps for instructions If Windows for Workgroup 3.11, Windows NT, Windows 95, or Windows 98 are used, follow the instructions for installing PC Cards in the PC's manual. Determine if any third party generic enablers installed on the PC. These are identified by a search through the CONFIG.SYS file for the following lines: Vendor Device Loaded in CONFIG.SYS --------------- ------------------------------- Awards Software DEVICE=C:\CARDWARE\PCENABLE.EXE System Soft DEVICE=C:\CARDSOFT\CARDID.EXE Phoenix DEVICE=C:\PCMPLUS\PCMSCD.EXE If one of these exist in your CONFIG.SYS, it can be used to enable the DME560T Ethernet/Fax/Modem PC Card. Follow the PCMCIA driver installation instructions in the PC's manual. If the PC Card drivers do not support multi-function cards, please use the included enabler. Disable all current PC Card drivers by editing the CONFIG.SYS and AUTOEXEC.BAT. If it is necessary to keep these drivers for other adapters skip to next section. Insert Driver Disk in drive A:. Type C: at the command prompt. Type MD DMECARD to make a new directory. Type COPY A:\ENABLER\*.* C:\DMECARD to copy the enabler to your directory. Modify the PATH= statement in your AUTOEXEC.BAT to include path C:\DMECARD. Change From PATH= To PATH=;C:\DMECARD Use the CARDEN.EXE to enable DME560T when the PC is loading Card Services. Getting Started 컴컴컴컴컴컴컴� For Novell, Lan Manager, and Packet Driver, first insert the DME560T Ethernet/Fax/Modem PC Card into one of the free PCMCIA card slots, remove all other PC Cards from your machine. Then insert the "DME560T Drivers Disk" into drive A, and type A:\INSTALL at the command prompt. The installation program will copy files to the destination directory and modify your related files(CONFIG.SYS, AUTOEXEC.BAT, and NET.CFG). For Windows for Workgroup, Windows NT ,Windows 95 & Windows 98 use the "Network Setup" utility provided by windows system to install the DME560T. On this disk you will find sub-directories for each of the Microsoft products. Each directory has a README.TXT that will help install that particular Microsoft product. After installation, simply reboot the machine to enable the DME560T. EMM386 Usage with DME560T 컴컴컴컴컴컴컴컴컴컴컴컴컴 Under PCMCIA all I/O cards (including Ethernet and Modem) must be initialized as memory cards and then switched into I/O mode operation by an enabler software. Therefore, the enabler software (such as CARDEN.EXE) must see the PC Card memory when it is executed. DOS extended memory managers such as EMM386 and QEMM take control of the PC memory space which effects PC Card initialization. There are two solutions available: 1) Run enabler (CARDEN or existing PC Card drivers + CARDEN) before EMM386 or QEMM is loaded. 2) Exclude at least 4K of memory from EMM386's or QEMM's use. An exclusion of X=D000-D3FF will work well.There may also be additional exclusions for your PCMCIA drivers, don't modify these. Driver Directory Structure 컴컴컴컴컴컴컴컴컴컴컴컴컴 The network drivers on this disk is organized in the following structure. Each directory contains a README.TXT file which provides you with detailed installation instructions for drivers in that directory: DME560T Diskette Release 05/01/96 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 CARDEN.EXE Direct PCMCIA Card Enabler for DOS, supports DME560T and Intel compatible, Compaq and Databook controllers. LMODI.COM DME560T DOS/ODI Driver working with direct enabler(LAN & MODEM run concurrently). Supports Intel compatible, Compaq and Databook controllers. LMNDIS.DOS DME560T DOS real mode NDIS Driver LMPD.COM DME560T DOS real mode Packet Driver LMNDIS.386 DME560T Enhance Mode NDIS Driver for Win for Workgroups LMNDIS.SYS LanModem Enhance Mode NDIS Driver for Windows 95 & 98. LMNDIS.SYS DME560T Enhance Mode NDIS Driver for Windows NT. Support Options 컴컴컴컴컴컴컴� We are consistently improving and upgrading our drivers. you are welcomed at any time to browse through our BBS, and download any drivers, utilities and help files. If you still cannot get the DME560T working properly, our technical experts are always ready to help. Please be at your computer, have your DME560T, Drivers Disk, and the following information available: * Version number of CARDEN.EXE and any drivers you are running * The extact text of any error message displayed on your screen * The type of computer * The type of network For technical support, you may contact your authorized D-Link distributor, dealer, or the following D-Link headquarters: In U.S.A. Tel: +1(949)455-1688 Fax: +1(949)455-2521 BBS: +1(949)455-1779 BBS: +1(949)455-9616 In Canada Tel: +1(905)828-0260 Fax: +1(905)828-5669 BBS: +1(905)828-6673 In U.K. & Europe Tel: +44(181)235-5555 Fax: +44(181)235-5500 BBS: +44(181)235-5511 In Germany Tel: +49(6196)643011 Fax: +49(6196)28049 BBS: +49(6196)28378 In Asia, Taiwan Tel: +886(2)916-1600 Fax: +886(2)914-6299 BBS: +886(2)910-1835 In France Tel: +33(1)30238688 Fax: +33(1)3028689 In Australia Tel: +61(2)4177100 Fax: +61(2)4171077 BBS: +61(2)4173711 In Nordic Tel: +46(40)163330 Fax: +46(40)163340 BBS: +46(40)163343 In Singapore Tel: +657746233 Fax: +657746322 BBS: +657744787 In China Tel: +86(10)4934175 Fax: +86(10)4991648 In Tokyo Tel: +81(3)57512351 Fax: +81(3)57512352 In India Tel: +91(22)6172478 Fax: +91(22)6172476 The BBS communication setup information is as follows : Speed: 2400-14400 baud - Germany 2400-9600 baud - Asia,Taiwan 14400-16800 baud - Canada 9600-14400 baud V32, V32bis, V42, V42bis - U.S.A. 2400-19200 baud V24, V32, V32bis, V42bis - U.K. & Europe Parity: None Data bits: 8 Stop bit : 1 Copyrights, Trademarks, and Disclaimers 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� All references to MS, Windows, Win95, Windows 95, Windows 98, Windows NT, WinNT are rights reserved by Microsoft Corporation All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights reserved by Novell Corporation Further rights reserved to their respective corporations